Yes Wood 01 Stain & Seal 1L

Spreading Rate: This product will cover approximately 7-9 m² / litre per coat depending on the type of substrate and the surface porosity.

Application: Thoroughly clean and prepare all surfaces by removing all dust, dirt, oil, grease, grime and flaking paint. Previously stained, treated or weathered wood must be sanded down to raw wood. Using a quality brush, roller, sponge or spray gun, apply 1-3 even coats. A light sanding between coats is recommended. Allow 4 hours drying time between coats. Allow at least 12 hours to cure. Important: Shake well before use. Do not apply in direct sunlight. Not suitable for wooden floors and decks.

• UV resistant
• 2-in-1 stainer and sealer
• Excellent adhesion
• Non-hazardous
• Low odour
• Quick drying
• UV resistant
• Water based
• Easy clean up