Chainsaw Chain Sharpener Electric 220v

Electric Chainsaw Chain Sharpener 220v Commercial Bench Mounted Saw Chain Grinder Sharpener ES009

If you use a Chainsaw Chain Sharpener at home, or on the farm or ranch, you know how important it is for speed and safety to be using a chain with sharp cutters. Yet cutters can be dulled quickly, even through plain heavy use. Until now, you’ve had three choices: replace the chain (expensive); resharpen it yourself by hand (very slow, and difficult to do accurately); or take it to your local chainsaw shop and get back a chain that may or may not be well sharpened. This Chain Sharpner Machine is a revolutionary new grinder for you to do this job. It’s very affordable and does the job quickly and very well. They use standard 230V current and the same style of shaped grinding wheel that the pro chainsaw shops use.

Specifications:

• Supply Voltage: 220-240V/50-60Hz
• Motor Input Power: 230W (Induction-motor
• No-Load Speed: 3000 rpm
• Cable Length: 1.50m Cable
• Aluminum Housing
• 15W Working lamp
• Fully adjustable 0 – 35° Cutting angle, vice angle set up
• Maximum Speed: 3000 rpm
• Noise Level: <85 dB (A)
• Weight: 5.8 kg

Features

• The time-consuming sharpening of the saw chains is shortened many times over with the this sharpening device.
• Made of sturdy metal that improve strength and performance
• Chainsaw sharpener with Max.speed: 3600min, grinds almost any chain type and size.
• The correct cutting angle achieved with the machine increases the cutting performance many times over.
• Size: 42 x 203 x 32cm
• Grinding wheel Ø inside: 22.3 mm
• Grinding wheel Ø outside: 145 mm
• Grinding wheel thickness: 3.2 mm and 4.7 mm

Grinding for Bench Mounted Workstation: All adjustables must be made prior to applying power to the unit.

• 1. Position the saw chain to eb ground onto the vise.
• 2. Setting top-plate cutting angle.
• a. Set grinder head angle to correct degree.
• b. Adjustment is made by loosening adjustment knob.
• c. At the back end of the grinder and rotating the grinder head to the desired angle.
• 3. Cutter top-plate grind angle, rotate visa assembly to right of center(0°).
• 4. Rotate vise assembly to left of center(0°).
• 5. Setting vise-tilt angle. The cutting chain visa assembly has a tilting feature, that is used to control the side plate hook angle on some chains. Use center mark for chains requiring 90°.
• 6. Tilt visa to inward position for lefthand cutters.
• 7. Tilt vise to outward position for righthand cutters.
• 8. Ser the chain stop. Using the cutting chain stop centering knob. Center the chain stop behind the cutter. Make final adjustment to the chain stop by adjusting the knob at the back of the chain stop support.
• 9. Center the cutting chain in the vise. Loose lock nut with 10mm wrench; Center chain by using 5.5mm Allen wrench; Once centered, retighten nut. Note: This setting will keep the left and righthand cutters equal when grinding top-plates. 10. See grind depth. Locate the chain cutter for grinding. Lower the grinding wheel( with motor off). Set depth of grind by using the depth adjustment knob. 11. Grind the cutters. Grind all right-hand cutters, rotate vise and grind all left-hand cutters.