Cement Slurry (Grey)

Spreading Rate: Apply at 1.0 kg per m² / coat for horizontal and vertical surfaces.

• Provides a rough keying base surface for improved adhesion
• Fibre reinforced
• Excellent adhesion onto old cementitious surfaces
• Prevents rising damp
• High resistance to water and cracking
• Improves strength & flexibility
• Reduces water penetration
• Non-toxic, alkaline base

Application: 

• Dampen the surface thoroughly with clean water before applying the first coat.
• Apply to the prepared substrate using a broom, block brush, large paint brush, trowel or spray.
• Apply at least two coats. The first coat in one direction and the second in a direction perpendicular to the first coat.
• Apply coating at approximately 2 mm to ensure that full coverage of the substrate is always achieved.
• Allow 4 – 6 hours drying time between coats.